|
| |
TM 9-2320-356-BD
Option 2:
Isolate without Plugs.
Procedural Steps:
Option 1:
Isolate and Plug.
1.
Remove hoses 4 and 5 from swing motor. Refer to figure below.
2.
Plug hoses with an appropriate fitting.
3.
Record the BDAR action taken. When the mission is completed, as soon as
practicable, repair using standard maintenance procedures.
1.
Remove hoses 4 and 5 from swing motor and control valve. Refer to figure above.
2.
Remove handle from control valve.
3.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable, repair using standard maintenance procedures.
14-5
|
