|
| |
TM 9-2320-356-BD
Limitations:
o Degraded braking
o Reduced speed
o Uneven braking
Personnel/Time Required:
o 1 or 2 soldiers
o 30 to 60 minutes
Material/Tools:
o Wire
o Visegrip pliers
Procedural Steps:
1.
Remove hydraulic line from the backing plate if necessary.
2.
Fold 2 inches of the line back and crimp it together.
3.
Fold the crimped portion in half and crimp it again.
4.
Wire the line to the nearest stationary place.
5.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable,
repair using standard maintenance procedures.
11-8.
PARKING BRAKE LOCKED
General Information:
Parking brakes are cable operated.
Most malfunctions are caused by the cable not
releasing the parking brake.
Some parking brakes are fixed to the transfer case,
and others are part of the rear axle brake system.
In most cases, the parking
brake handle will not release, causing the brakes to remain applied. Disconnecting
the linkage will release the brakes.
Limitations:
o No parking brakes
Personnel/Time Required:
o 1 soldier
o 5 minutes
Materials/Tools:
o P l i e r s
o Adjusting wrench
11-5
|
