|
| |
TM 9-2320-356-BD
9.
Add gear lubricant if necessary.
10. Record the BDAR action taken.
When the mission is completed, as soon as
practicable, repair using standard maintenance procedures.
Option 2:
Nonhardening Sealer.
1.
Cut a wooden peg approximately the same size as the hole if hardening sealant
is not available.
2.
Clean area around hole or cracks with sandpaper
3.
Cover the peg with nonhardening or silicone sealer and insert peg into hole.
4.
Apply sealer around peg to ensure secure seal.
5.
Let dry at least 1 hour.
6. Add gear lubricant if necessary.
7.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable, repair using standard maintenance procedures.
9-3
|
