|
| |
TM 9-2320-356-BD
8-7. FUSE OR CIRCUIT BREAKER FAILURE
General Information:
A short or overload in a circuit will cause the fuse to burn out or the circuit
breaker to trip,
i.e., the circuit becomes inoperative. A temporary repair can be
made by bypassing the protection device with straight wiring or by replacing the
fuse with tinfoil, wire, ballpoint pen spring, or similar conductor. Use of solder
will provide some amount of circuit protection.
CAUTION
Damage to the equipment can occur when
circuits are not properly fused.
Record the BDAR action taken.
When the mission is compl
repair using standard maintenance procedures.
the
ete, as soon as practicable,
8-5
|
