|
| |
TM 9-2320-356-BD
3.
Connect the fittings and lines to a 1/4-inch tee.
4.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable,
repair using standard maintenance procedures.
Option 4:
Bypass Fuel Filter for M915.
1.
Remove and discard damaged fuel filter.
2.
Disconnect fuel line at injector pump.
3.
Install JIC-to-pipe adapter fitting.
4.
Connect JIC-to-pipe adapter fitting to fuel line.
5.
Remove intake air hose and cable clamps from compressor.
6.
Cut hose to length needed.
7.
Install two clamps loosely on each end of hose.
8.
Fit hose over fuel line and fuel filter inlet.
9.
Tighten clamps.
10. Record the BDAR action taken.
When the mission is completed, as soon as
practicable, repair using standard maintenance procedures.
6-17
|
