 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 33
TM 9-2320-312-24-2
Truck Engine
Disassembly and Assembly Section
Installation Procedure
Table 15
Required Tools
Part
Tool
Part Description
Qty
Number
A
1
1U-7793
Valve Guide Driver
1
9U-6895
B
Valve Guide Driver
1
1U-7792
Guide Collar
C
1
149-4008
D
Guide Collar
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
g00615087
Illustration 82
top of exhaust valve guide (2). This is done in
order to start the exhaust valve guide into the
cylinder head assembly.
4. Use Tooling (B) and Tooling (D) to install
exhaust valve guide (2). Install exhaust valve
guide (2) until the protrusion is 17.8 0.5 mm
(0.70 0.02 inch) above the cylinder head
assembly.
End By:
a. Install the inlet and exhaust valves. Refer to
Disassembly and Assembly, "Inlet and Exhaust
Valves - Remove and Install".
g00615080
Illustration 81
1. Position inlet valve guide (1) and tap on the top
of inlet vave guide (1). This is done in order to
start inlet valve guide (1) into the cylinder head
assembly.
2. Use Tooling (A) and Tooling (C) to install inlet
valve guide (1). Install inlet valve guides (1) until
the protrusion is 23.0 0.5 mm (0.90 0.02 inch)
above the cylinder head assembly.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals