Illustration 26 Accelerator pedal assembly

150

TM 9-2320-312-24-2

Troubleshooting Section

g00706977

Illustration 26

Accelerator pedal assembly

Not OK The accelerator pedal position sensor

Expected Result:

is faulty. Check the accelerator pedal assembly

When the sensor is removed from the accelerator

in order to ensure that the accelerator pedal

pedal assembly and the sensor slot is released, the

assembly is not causing damage to the sensor.

duty cycle is 10 percent or less. When the sensor

If the accelerator pedal assembly is causing

slot is moved to the maximum position, the duty

damage to the sensor, refer to the OEM dealer

cycle increases to 90 percent or more.

for correct replacement of the accelerator pedal

assembly. If the accelerator pedal assembly

appears OK, replace the accelerator pedal

Results:

position sensor. STOP.

OK The accelerator pedal position sensor is

Test Step 11. Route the Supply Bypass

working correctly. Clear any diagnostic codes that

Wires to the Accelerator Pedal Position

were caused by performing this test procedure.

Sensor

Refer to the OEM dealer for correct replacement

of the accelerator pedal assembly. STOP.

A. Turn the ignition key switch to the OFF position.