OCT01 and newer Personality Modules -807640235

TM 9-2320-312-24-2

Troubleshooting Section

Table 85

Table 88

Alternative

Default

Alternatives

Default

J1/P1:46

"J1/P1:7", "J1P1:23"

"None"

"NONE"

"J1939 Body Controller"

"J1939 Cab Controller"

"PTO Engine Shutdown Switch"

"J1939 Instrument Cluster"

OCT01 and newer Personality Modules.

"PTO Engine RPM Set Speed Input A"

This parameter configures an input to use for a

OCT01 and newer Personality Modules.

engine shutdown switch. The switch will shut down

the engine when the engine is in PTO mode and

This parameter configures an input for a PTO

there is no vehicle speed.

engine rpm set speed A switch. This switch is used

to control engine speed during PTO operation.

Table 89

The "PTO Configuration" parameter must be

Alternatives

Default

programmed to "Cab Switches", "Remote Switches"

or "Remote Throttle" and the "PTO Engine RPM

"None"

"J1/P1:7", "J1P1:23"

Set Speed A" parameter must be programmed to

a valid speed.

"Cruise Control On/Off Switch"

Table 86

OCT01 and newer Personality Modules.

Alternative

Default

This parameter configures an input for a cruise

"J1P1:46"

"NONE"

control on/off switch. Set this parameter to

"J1/P1:59" if a switch is wired to this input. Set this

"Input #19"

parameter to "J1939 Body Controller", "J1939 Cab

Controller", or "J1939 Instrument Cluster" if a J1939

JUL99 through JUN01 Personality Modules.

message is used.

The PTO engine rpm set speed B switch can

Table 90

be connected to "Input #19". If the "Input #19"

Alternative

Default

parameter is programmed to "PTO Engine RPM

Set Speed Input B", the switch is used to control

"J1939 Body Controller"

"J1/P1:59"

"J1939 Cab Controller"

engine speed during PTO operation. The "PTO

"J1939 Instrument Cluster"

Configuration" parameter must be programmed to

"Cab Switches", "Remote Switches" or "Remote

Throttle" and the "PTO Engine RPM Speed Input B"

"Cruise Control Set/Resume Switch"

parameter must be programmed to a valid speed.

OCT01 and newer Personality Modules.

Table 87

This parameter configures an input for a cruise

Alternatives

Default

control set/resume switch. Set this parameter to

"PTO Engine RPM Set

"None"

"J1/P1:35 & 44" if a switch is wired to this input. Set

Speed Input B"

this parameter to "J1939 Body Controller", "J1939

Cab Controller", or "J1939 Instrument Cluster" if a

"PTO Engine RPM Speed Input B"

J1939 message is used.

OCT01 and newer Personality Modules.

Table 91

Alternative

Default

This parameter configures an input for a PTO

"J1939 Body Controller"

"J1/P1:35 & 44"

engine rpm set speed B switch. This switch is used

"J1939 Cab Controller"

to control engine speed during PTO operation.

"J1939 Instrument Cluster"

The "PTO Configuration" parameter must be

programmed to "Cab Switches", "Remote Switches"

or "Remote Throttle" and the "PTO Engine RPM

"Cruise Control Pause Switch"

Set Speed B" parameter must be programmed to

a valid speed.

OCT01 and newer Personality Modules.