 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
ALTERNATOR REPAIR - CONTINUED
0159 00
ASSEMBLY - CONTINUED
14.
Press on inner race of bearing (32) to install bearing onto core/shaft assembly (18), through bearing bore in end housing
(30).
15.
Install fan (29) on core/shaft assembly (18) with washer (27) and new locknut (26). Tighten locknut to 50 lb-ft (68 Nm).
16.
Install fan guard (28) with four washers (24) and screws (25). Tighten screws to 45 lb-in (5.1 Nm).
17.
Coat phase lead diode studs and field coil studs with conformal coating RTV. Allow time to set, in accordance with man-
ufacturer's instructions.
18.
Install cover plate (6) with four screws (5). Tighten screws to 30 lb-in (3.4 Nm).
19.
Install pulley bushing (4).
20.
Install woodruff key (17).
21.
Slide pulley (3) on core/shaft assembly (18) and install washer (2) and new locknut (1). Tighten locknut to 120 lb-ft (163
Nm).
0159 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals