 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
CAB WINDSHIELD AND WINDOW GLASS REPLACEMENT - CONTINUED
0148 00
REMOVAL
1.
If window glass (2) is being replaced due to any cause other than being hit by a flying object, mark edge of seal (1) or
cab sheet metal at location of crack.
2.
At outside of vehicle cab, cut through adhesive at seal (1), at bottom-center of window glass (2).
3.
Using flat or pointed tool, insert tool in separation slot at middle of seal (1) and pull outer half of seal down and away
from inner half of seal to "unlock" seal.
4.
Continue "unlocking" outer half of seal (1) around entire length of seal.
NOTE
One person may gently push outward on window glass from inside cab as step 4 is performed.
5.
Gently and evenly pry window glass (2) away from seal (1) and remove window glass from cab.
6.
Remove seal (1) from cab. Retain seal to use as a template to cut correct length of new seal.
1
2
0148 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals