 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
FRONT SPRINGS REPLACEMENT - CONTINUED
0144 00
REMOVAL
1.
Loosen lug nuts on wheel and tire assembly, on same side of vehicle as spring (1) to be removed.
2.
At front of vehicle, place one hydraulic jack under each side of frame rail just behind location stenciled "TIE DOWN
POINT". Raise vehicle and support with jackstands under front bumper.
3.
Remove wheel and tire assembly (TM 9-2320-312-10).
4.
Position a floor jack centered under front axle assembly (5) for support.
NOTE
Note position of spring cap for installation.
5.
Remove four nuts (6), washers (7), two U-bolts (4), and spring cap (2) from spring (1).
4
3
2
1
5
8
6
7
6.
At front of spring (1), remove nut (10) and bolt (9) from spring and frame.
7.
At rear of spring (1), remove nut (14), bolt (11), and spacer (13) from spring hanger (12).
8.
Lower floor jack sufficiently to allow spring (1) to clear spring hanger (12) and other vehicle components.
0144 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals