 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
RADIATOR ASSEMBLY, FAN SHROUD, AND CHARGE AIR COOLER
REPLACEMENT - CONTINUED
0142 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may result in injury or death to person-
nel
NOTE
Radiator, air duct, and charge air cooler are removed from vehicle as an assembly.
12.
Attach a sling to each side of charge air cooler (28). Attach other end of slings to overhead lifting device.
13.
Raise overhead lifting device to take up slack in slings.
14.
At each side of radiator (8), remove nut (29), washer (31), and vibration damper (30) from underside of bolt (32).
CAUTION
Use caution when lifting radiator assembly not to damage electrical harnesses or other components.
15.
Carefully lift radiator (8) assembly from vehicle.
16.
Remove two bolts (32), four washers (31), and two vibration dampers (30) from radiator (8).
28
32
8
31
30
29
31
30
17.
Remove overhead lifting device and slings.
0142 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals