 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
TRANSMISSION REPLACEMENT - CONTINUED
0139 00
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable capacity. Keep clear
of heavy parts supported only by lifting device. Failure to follow this warning may result in injury or
death to personnel.
NOTE
Transmission dry weight is approximately 575 lb (260 kg).
REMOVAL
1.
Place transmission lift directly under and centered on transmission (11). Raise lift into position and support trans-
mission.
2.
Remove two locknuts (2), bolts (3), spring cap (12), tail shaft support spring (9), and spacers (10) from transmis-
sion mounting bracket (1). Discard locknuts.
3.
Remove nut (6), bolt (7), clamp (5), and release air dryer-to-air compressor hose (4) from standoff bracket (8).
2,3
4
5
9
6,7
8
1
11
12
10
4.
Remove access plug (13) from right side of engine bell housing (14) to access transmission drive plate bolts.
WARNING
Do not place finger in hole in engine bell housing while engine is being barred over. Failure to follow
this warning could result in injury.
0139 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals