|
|
![]() TM 9-2320-312-24-1
POWERPACK REPLACEMENT - CONTINUED
0138 00
INSTALLATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance dur-
ing procedure. Ensure that any lifting device used is in good condition and of suitable load capacity.
Keep clear of heavy parts supported only by lifting device. Failure to follow this warning may result
in injury or death to personnel.
Engine with standard accessories has a dry weight of approximately 1295 lb (588 kg). Transmission
dry weight is approximately 575 lb (260 kg). Ensure lifting device capacity is sufficient to lift pow-
erpack combined weight of approximately 1860 lb (849 kg). Failure to do so could result in damage
to equipment or injury or death to personnel.
8.
Position suitable overhead lifting device over powerpack and rig for lifting:
a.
Attach a three-point lifting device to lift points at front left and right rear of engine and to transmission mount-
ing bracket.
b.
Check to ensure powerpack is securely rigged with rigging positioned to ensure a safe and balanced lift.
c.
Take up all slack in rigging until powerpack is supported by lifting device.
WARNING
Use extreme caution when lifting powerpack. Proceed slowly and be alert for any component on vehicle
that may interfere with powerpack's placement on engine mounts. Do NOT allow powerpack to swing
free. Keep it under control at all times. Failure to follow this warning may cause damage to equipment
or injury or death to personnel.
9.
Raise powerpack with lifting device just enough to ensure lift is secure and balanced. If adjustment in rigging is
needed, lower powerpack onto cribbing and make adjustments.
10.
Lift powerpack off cribbing and move to vehicle.
CAUTION
As powerpack is lowered into vehicle, ensure all fuel, oil, coolant, hydraulic, AC, and electrical lines are
clear.
11.
Position powerpack and lower into vehicle until engine rests on front and rear engine mounts and transmission is
resting on suitable support.
0138 00-16
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |