 |
|||
|
|
|||
|
Page Title:
ENGINE OIL SAMPLING VALVE HOSES AND FITTINGS REMOVAL - CONTINUED |
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
ENGINE AND TRANSMISSION OIL SAMPLING VALVES, HOSES,
AND FITTINGS REPLACEMENT - CONTINUED
0132 00
ENGINE OIL SAMPLING VALVE HOSES AND FITTINGS REMOVAL - CONTINUED
10.
Trace hose (15) to left side of engine (17). Remove tiedown straps and discard.
11.
Disconnect hose (15) from adapter fitting (16) and remove hose from vehicle.
12.
As required, remove adapter fitting (16) from engine (17).
15
16
17
ENGINE OIL SAMPLING VALVE HOSES AND FITTINGS INSTALLATION
NOTE
Route hoses between points of installation as was noted during removal. Ensure new tiedown straps are
installed to support hoses after all connections are made.
Apply pipe sealing compound to male threads of fittings where use of pipe sealing compound was noted
during removal.
1.
If removed, install adapter fitting (16) to engine (17).
2.
Position hose (15) between points of installation. Connect hose to adapter fitting (16).
3.
If removed, install adapter fitting (14) to tee (13) at crossmember (10).
4.
Connect hose (15) to adapter fitting (14).
5.
If removed, install elbow (11) to tee (12).
6.
Position hose (8) between points of installation. Connect hose to elbow (11).
0132 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals