|
|
TM 9-2320-312-24-1
BATTERY CABLES REPLACEMENT - CONTINUED
0115 00
INSTALLATION - CONTINUED
CAUTION
The KAPower module (capacitor) is polarity sensitive. Polarity must be strictly observed or damage to
capacitor will result.
3.
Install battery cable (20) and electrical lead (21) to capacitor start relay (24) with washer (23) and nut (22).
4.
Connect battery cable (20) to capacitor (11) with washer (19), lockwasher (18), and nut (17).
NOTE
Battery cable (10) is routed through rear of battery box, along left side of engine, to starter solenoid.
5.
Position battery cable (10) to vehicle.
6.
Install battery cable (10) to starter solenoid (WP 0092 00).
NOTE
Battery cable (3) is routed through rear of battery box, to upper terminal stud at rear of battery box.
7.
Position battery cable (3) to vehicle.
NOTE
Three wires are also installed as battery cable (3) is installed.
8.
Install battery cable (3) to upper terminal stud (15) with nut (16).
16
15
3
0115 00-7
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |