 |
|||
|
|
|||
|
Page Title:
TURN SIGNAL LEVER REMOVAL - CONTINUED |
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
TURN SIGNAL LEVER AND TURN SIGNAL FLASHER UNIT REPLACEMENT - CONTINUED
0100 00
TURN SIGNAL LEVER REMOVAL - CONTINUED
2.
Disconnect connector (3) of turn signal lever (5) wiring from cab wiring harness (4).
NOTE
Remove tiedown strap and discard. Ensure new tiedown strap is used on installation.
Note position of turn signal lever on steering column for installation.
3.
Remove clamp (7) and turn signal lever (5) from steering column (6).
4
5
3
6
7
TURN SIGNAL LEVER INSTALLATION
1.
Install turn signal lever (5) to steering column (6) with clamp (7).
2.
Connect connector (3) of turn signal lever (5) wiring to cab wiring harness (4).
NOTE
Install air duct to rear of grille as lower-left instrument panel is installed.
3.
Install lower-left and upper-front instrument panels (2) to instrument panel frame with 16 screws (1).
4.
Place battery disconnect switch in ON position.
0100 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals