 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
INTERVEHICULAR AIR HOSE ASSEMBLY MAINTENANCE - CONTINUED
0069 00
DISASSEMBLY
1.
If damaged, remove preformed packing (5) from gladhand (1) and discard.
2.
Remove gladhand (1) from end of hose assembly (3).
5
1
3
ASSEMBLY
NOTE
Apply a thin coat of pipe sealing compound to threads of male fitting before connections are made.
1.
Install gladhand (1) to end of hose assembly (3).
2.
If removed, install new preformed packing (5) to gladhand (1).
INSTALLATION
NOTE
Top port of valve is EMERGENCY port. Bottom port is SERVICE.
Apply a thin coat of pipe sealing compound to threads of hose assembly before connections are made.
1.
Connect hose assembly (3) to cab-mounted tractor protection valve (4) at rear of cab.
2.
Stow hose assembly gladhand (1) on dummy coupling (2).
3.
Start engine and fully pressurize air system (TM 9-2320-312-10). Release trailer brakes to pressurize hose assembly (3).
4.
Check for air leaks: Use a detergent and water solution to check for leaks at air connections. Shut down engine (TM 9-
2320-312-10).
END OF WORK PACKAGE
0069 00-3/4 Blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals