PUSH-IN FITTING INSTALLATION

TM 9-2320-312-24-1

AIR SYSTEM LINES AND FITTINGS REPLACEMENT - CONTINUED

0066 00

PUSH-IN FITTING INSTALLATION - CONTINUED

TUBE

CUTTER

Position new air line to vehicle. Check that port or mating part is clean and free of debris.

NOTE

Perform steps 4 and 5 at each end of air line.

Insert air line into push-in fitting until it bottoms. Push twice to ensure that air line is inserted past collet and o-ring.

Confirm that air line is fully installed to push-in fitting by pulling on air line. Air line should not pull out of push-in fit-

ting.

INSERT AIR LINE UNTIL IT BOTTOMS

END OF WORK PACKAGE

0066 00-3/4 Blank