 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
AIR DRYER REPLACEMENT - CONTINUED
0061 00
REMOVAL - CONTINUED
NOTE
Perform steps 7 and 8 as needed to remove air dryer bracket.
7.
Remove locknut (14), screw (15), and clamp (16), with air hoses (3 and 5) from air dryer bracket (10). Discard locknut.
8.
Remove four nuts (11), screws (12), and air dryer bracket (10) from two mounting brackets (13).
13
10
11,12
14,15,16
5
3 (OUTLET)
INSTALLATION
1.
If removed, install air dryer bracket (10) to two mounting brackets (13) with four screws (12) and nuts (11).
2.
Install clamp (16), with air hoses (3 and 5), to air dryer bracket (10) with screw (15) and new locknut (14).
NOTE
Apply a thin coat of pipe sealing compound to male threads of fittings before connections are made.
3.
Install elbow (1) to air dryer (2).
4.
Install two elbows (4) to air dryer (2).
5.
Install air dryer (2) to air dryer bracket (10) with three washers (9), new lockwashers (8), and screws (7).
6.
Connect air line (5) to elbow (1).
7.
Connect two air lines (3) to two elbows (4).
8.
Connect wiring harness connector (6) to air dryer (2).
9.
Place battery disconnect switch in ON position.
END OF WORK PACKAGE
0061 00-3/4 Blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals