 |
|||
|
|
|||
|
Page Title:
RESERVOIR AND PUMP UNIT INSTALLATION |
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
WINDSHIELD WASHER RESERVOIR MAINTENANCE - CONTINUED
0059 00
RESERVOIR AND PUMP UNIT INSTALLATION
NOTE
Perform step 1 to install bracket to rear of front bumper.
1.
Install bracket (2) to bumper (17) with two washers (16), screws (15), and nuts (14).
2.
Install pump unit (8) to reservoir (3):
a.
Insert grommet (7) into hole of reservoir (3) and attach plastic retainer (6) from inside reservoir.
b.
Screw pump unit (8) into retainer (6) five full turns or until sealed water tight.
3.
Install hose (11) to pump unit (8).
4.
Install reservoir (3) to bracket (2) with four screws (13) and nuts (12).
5.
Connect connector (9) of pump unit (8) to wiring harness connector (10).
6.
Install six slip-on nuts (5) to bracket (2).
7.
Install cover (4) to bracket (2) with six screws (1).
2
4
1
8.
Fill windshield washer reservoir with windshield cleaning compound.
9.
Place battery disconnect switch in ON position.
0059 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals