 |
|||
|
|
|||
|
Page Title:
UPPER HOUSING REMOVAL - CONTINUED |
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
SEAT REPAIR - CONTINUED
0053 00
UPPER HOUSING REMOVAL - CONTINUED
9.
Remove two locknuts (43) from each side of upper housing (10).
10.
Remove two bearing shafts (44) and upper housing (10) from upper linkage (46) and lower linkage (27).
11.
Remove two bearings (45) from upper linkage (46) and two bearings (45) from lower linkage (27).
12.
Remove locknut (40), screw (41), and reinforcing plate (42) from each side of upper housing (10).
10
42
40,41
43,44,45
46
27
UPPER HOUSING INSTALLATION
1.
Install reinforcing plate (42) to each side of upper housing (10) with screw (41) and locknut (40).
NOTE
Apply a thin coat of lubricating oil of inside of bearing surface before installing bearings. Wipe clean any
excess oil.
2.
Install two bearings (45) to upper linkage (46) and two bearings (45) to lower linkage (27).
3.
Install upper linkage (46) and lower linkage (27) to upper housing (10) with two bearing shafts (44).
4.
Install two locknuts (43) to each side of upper housing (10).
5.
Install tether bar (39) to rear of upper housing (10) with two screws (38), washers (37), and locknuts (36).
0053 00-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals