 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
SEAT REPAIR - CONTINUED
0053 00
AIR SPRING REMOVAL
1.
Remove seat from vehicle (WP 0052 00).
2.
Remove seat back and cushion assembly (Refer to Seat Back and Cushion Assembly Removal).
3.
Use wood cribbing to support seat suspension in fully raised position.
4.
Use air valve height adjustment lever to release air from air spring (TM 9-2320-312-10).
5.
Remove screw (31) and lockwasher (32) securing top of air spring (33) to bracket plate (19) and upper housing (10).
NOTE
Refer to WP 0066 00 for information on removing and installing air tube to push-in fitting.
6.
Disconnect air tube (18) from elbow (34) at bottom of air spring (33).
7.
Remove elbow (34) and nut (35) from air spring (33).
8.
Remove air spring (33) from lower linkage (27).
19
31,32
27
33
10
18
35
34
AIR SPRING INSTALLATION
1.
Position air spring (33) to lower linkage (27) and install nut (35).
2.
Apply a thin coat of pipe sealing compound to pipe threads of elbow (34) and install elbow to bottom of air spring (33).
3.
Connect air tube (18) to elbow (34).
4.
Install top of air spring (33) to upper housing (10) and bracket plate (19) with lockwasher (32) and screw (31).
5.
Remove wood cribbing.
6.
Install seat back and cushion assembly (Refer to Seat Back and Cushion Assembly Installation).
7.
Install seat (WP 0052 00).
0053 00-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals