 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
FRONT BUMPER REPLACEMENT - CONTINUED
0037 00
REMOVAL
1.
Remove two nuts (2), screws (3), and license plate (1), if equipped, from front bumper (4).
2.
Attach chains to front bumper (4) and to overhead lifting device. Raise overhead lifting device to remove slack in
chains.
3.
Remove six nuts (5), bolts (6), and front bumper (4) from front of vehicle frame.
2,3
4
1
5,6
INSTALLATION
1.
Using chains and overhead lifting device, position bumper (4) to front of vehicle frame.
2.
Install bumper (4) with six bolts (6) and nuts (5). Tighten nuts to 240 lb-ft (325 Nm).
3.
Remove chains and lifting device.
4.
Install license plate (1), if equipped, to front bumper (4) with two screws (3) and nuts (2).
5.
Install front turn signal lights (WP 0103 00).
6.
Install windshield washer reservoir (WP 0059 00).
END OF WORK PACKAGE
0037 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals