 |
|||
|
|
|||
|
Page Title:
|
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
STEERING COLUMN ASSEMBLY REPLACEMENT - CONTINUED
0035 00
UPPER STEERING COLUMN REMOVAL - CONTINUED
6.
Remove upper steering column (9) with mount (5) assembly from vehicle.
7.
Remove cap (15), mount (5), and two vibration dampers (16) from upper steering column (9).
5
15
16
9
16
8.
If damaged, replace upper steering column horn components (Refer to Horn Repair at end of work package).
UPPER STEERING COLUMN INSTALLATION
1.
Position two vibration dampers (16), mount (5), and cap (15) to upper steering column (9).
2.
Position upper steering column (9) with mount (5) assembly to cab.
3.
Position upper steering column (9) to yoke of lower steering column (14) and align matchmarks. Install screw (12) and
nut (13). Tighten nut to 26 lb-ft (35 Nm).
4.
Connect ground terminal (8) at upper steering column (9) with washer (7) and screw (6).
5.
Install mount (5) assembly to cab with six bolts (10). Tighten bolts to 31 lb-ft (42 Nm).
6.
Connect two connectors (11) of upper steering column (9) to wires of cab wiring harness (4).
0035 00-3
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals