 |
|||
|
|
|||
|
Page Title:
|
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
FRONT AXLE HUB, DRUM, WHEEL BEARINGS, AND OIL SEAL REPLACEMENT - CONTINUED
0033 00
INSTALLATION AND WHEEL BEARING ADJUSTMENT - CONTINUED
5.
Install adjusting nut (13) on axle spindle (14). Tighten nut sufficiently to secure hub.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
6.
Install drum on hub (1).
7.
Rotate wheel back and forth and tighten adjusting nut (13) to 200 lb-ft (271 Nm).
8.
Back off adjusting nut (13) one full turn.
9.
Rotate wheel back and forth and tighten adjusting nut (13) to 50 lb-ft (68 Nm).
10.
Back off adjusting nut (13) 1/2 turn.
11.
Install washer (12), retainer washer (11), and jamnut (10) on axle spindle (14).
12.
Tighten jamnut (10) to 250 lb-ft (339 Nm).
13.
Bend tab of retainer washer (11) over one flat on jamnut (10).
13
11
10
12
14
0033 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals