REMOVAL - TM-9-2320-312-24-10280

TM 9-2320-312-24-1

FRONT AXLE HUB, DRUM, WHEEL BEARINGS, AND OIL SEAL REPLACEMENT - CONTINUED

0033 00

REMOVAL

Provide suitable support for drum (2) or have an assistant support drum prior to performing step 2.

Depress locking sleeve (4) at slack adjuster (3) and turn counterclockwise to back off brakes until drum (2) rotates

freely.

Remove drum (2) from hub (1).

WARNING

When servicing this vehicle, performing maintenance, or disposing of materials such as engine coolant,

transmission fluid, lubricants, battery acids or batteries, consult your unit/local hazardous waste disposal

center or safety office for local regulatory guidance. If further information is needed, please contact The

Army Environmental Hotline at 1-800-872-3845.

NOTE

Use a suitable container to capture draining oil. Dispose of oil in accordance with local policy and ordi-

nances. Ensure all spills are cleaned.

Remove plug (9), then rotate hub (1) and drain oil into a suitable container.

Remove six bolts (5), lockwashers (6), hubcap assembly (7), and gasket (8) from hub (1). Discard lockwashers and gas-

ket.

0033 00-2