 |
|||
|
|
|||
|
Page Title:
|
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
SHOCK ABSORBER AND MOUNTING BRACKETS REPLACEMENT - CONTINUED
0032 00
SHOCK ABSORBER REMOVAL - CONTINUED
2.
Remove locknut (10) and washer (9) at upper end of shock absorber (3). Discard locknut.
3.
Remove shock absorber (3) and washer (8) from lower bracket (2) and upper bracket (11).
SHOCK ABSORBER INSPECTION
1.
Inspect two bushings (6) and tube spacer (7) at each end of shock absorber for wear or deterioration. There should be no
metal-to-metal contact. Replace bushings if damaged.
2.
Inspect shock absorber for evidence of leaks. Compress and extend shock absorber. Movement should be smooth with
constant resistance throughout stroke. If leaks are noted or if there is skipping, binding or unusual noises when shock
absorber is compressed and extended, replace shock absorber.
SHOCK ABSORBER INSTALLATION
1.
Position shock absorber (3) with four bushings (6), two tube spacers (7), and washer (8) to lower bracket (2) and upper
bracket (11).
2.
Install upper end of shock absorber (3) to upper bracket (11) with washer (9) and new locknut (10).
3.
Install lower end of shock absorber (3) to lower bracket (2) with washer (4), bolt (5), and new locknut (1).
4.
Tighten locknuts (1 and 10) to 225 lb-ft (305 Nm).
9
3
6
3
8
2
1
4
10
5
6
11
7
LEFT SIDE
6
7
8
5.
Lower cab (TM 9-2320-312-10).
0032 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals