 |
|||
|
|
|||
|
Page Title:
|
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
FRONT AND REAR AIRBRAKE CHAMBERS REPLACEMENT - CONTINUED
0031 00
REAR AIRBRAKE CHAMBER REMOVAL - CONTINUED
19
18
20
16
17
21,22,23
26
24
25
REAR AIRBRAKE CHAMBER INSTALLATION
1.
Install jamnut (24) and pushrod clevis (18) to airbrake chamber pushrod (19), in same position as noted during removal.
Tighten jamnut.
NOTE
Replacement airbrake chamber comes with new mounting hardware.
2.
Install airbrake chamber (16) to airbrake chamber bracket (20) with two new washers (23), new lockwashers (22), and
new nuts (21). Tighten nuts to 133-155 lb-ft (180-210 Nm).
3.
Connect pushrod clevis (18) to bottom hole in slack adjuster (17) with pin (25) and new cotter pin (26).
NOTE
Apply a thin coat of pipe sealing compound to male threads of fittings before they are installed.
4.
Install two elbows (15) to airbrake chamber (16).
5.
Install two adapters (14) to elbows (15).
6.
Connect two hoses (13) to adapters (14).
7.
Uncage brakes (TM 9-2320-312-10).
8.
Start engine and fully pressurize air system (TM 9-2320-312-10).
9.
Check for air leaks: apply a detergent and water solution to airbrake chamber and hose connections.
END OF WORK PACKAGE
0031 00-5/6 Blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals