CONTROL CABLE INSTALLATION

TM 9-2320-312-24-1

FIFTH WHEEL LIFT CONTROL AND CABLE MAINTENANCE - CONTINUED

0030 00

CONTROL CABLE INSTALLATION - CONTINUED

Install two spacers (27) and two halves of cable guide (24) to cable (7) and control valve (26) with two screws (25).

NOTE

Replacement cable guide comes with new lockwashers.

Install two screws (23), new lockwashers (22), and nuts (21) to end of cable guide (24).

21,22,23

(USE STRIP CAULK)

Install front access cover to cab (WP 0046 00).

Lower cab (TM 9-2320-312-10). Place battery disconnect switch in OFF position.

Secure cable (7) inside cab with clamps and new self-tapping screws.

Connect cable (7) to fifth wheel lift control (Refer to Fifth Wheel Lift Control Installation).

Place battery disconnect switch in ON position.

10.

Start engine and check operation of fifth wheel lift control (TM 9-2320-312-10).

11.

Install transmission access cover (WP 0039 00).

0030 00-10