FIFTH WHEEL LIFT CONTROL REMOVAL

TM 9-2320-312-24-1

FIFTH WHEEL LIFT CONTROL AND CABLE MAINTENANCE - CONTINUED

0030 00

FIFTH WHEEL LIFT CONTROL REMOVAL

Remove eight screws and lift right-side instrument panel (4) away from mounting on instrument panel frame.

Remove four nuts (2), screws (1), and shift tower (3), with both transmission range selector and fifth wheel lift con-

trol, from right-side instrument panel (4).

1,2

NOTE

Tag all connections to ensure correct installation.

Disconnect fifth wheel lift control connector (5) from vehicle wiring harness connector (6).

Disconnect transmission range selector connector (9) from vehicle wiring harness connector (8).

NOTE

Note position of cable clamp in relation to gradations on hanger plate to ensure proper adjustment of

cable on installation.

Note hole in handle unit actuator arc into which cable lug is installed (2nd hole).

Remove two nuts (14), screws (10), cable clamp (13), and shim (11) from cable (7).

Rotate handle unit (12) and remove lug of cable (7) from actuator arc.

0030 00-2

Change 1