REMOVAL - CONTINUED - TM-9-2320-312-24-10202

TM 9-2320-312-24-1

MUFFLER AND EXHAUST PIPES REPLACEMENT - CONTINUED

0022 00

REMOVAL - CONTINUED

NOTE

Perform steps 16 and 17 to remove flex and exhaust pipes from engine.

16.

Loosen two screws (28) of clamp (27) and remove flex pipe (3) from exhaust pipe (29).

17.

Loosen clamp (30) and remove exhaust pipe (29) from turbocharger (31).

INSTALLATION

NOTE

Perform steps 1 and 2 to install exhaust and flex pipes to engine.

Clamps should be fully tightened after all pipes and elbow are installed.

Install exhaust pipe (29) to turbocharger (31) with clamp (30).

Install flex pipe (3) to exhaust pipe (29) and with two screws (28) of clamp (27).

Fully tighten clamp (30) and screws (28) of clamp (27).

0022 00-6