 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
MUFFLER AND EXHAUST PIPES REPLACEMENT - CONTINUED
0022 00
WARNING
Exhaust system components may be hot to the touch. Avoid contact with any part of exhaust system
until sufficiently cool. Failure to do so could result in injury to personnel.
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may result in injury
or death to personnel.
REMOVAL
1.
Remove two nuts (4), clamp (2), and elbow (1) from flex pipe (3).
3
2
1
4
2.
Remove 12 bolts (6) and upper heat shield (5) from muffler (9) assembly.
3.
Attach a lifting sling to shield bracket (7) at top of exhaust pipe (8). Attach other end of sling to a suitable overhead lift-
ing device.
4.
Raise overhead lifting device to take up slack in sling.
5.
Remove four bolts (11) and lower heat shield (10).
0022 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals