 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
FUEL LEVEL SENDING UNIT REPLACEMENT - CONTINUED
0021 00
REMOVAL - CONTINUED
1.
Remove two nuts (2) and lockwashers (3) and disconnect two wires (7) of vehicle wiring harness from top of fuel level
sending unit (5). Discard lockwashers.
2.
Remove five screws (4) and fuel level sending unit (5) from top of fuel tank (1).
3.
Remove gasket (6) from fuel level sending unit (5). Discard gasket.
2,3
1
4
5
6
7
INSTALLATION
NOTE
Replacement fuel level sending unit comes with new gasket.
1.
Position new gasket (6) to fuel level sending unit (5).
2.
Install fuel level sending unit (5) to top of fuel tank (1) with five screws (4).
3.
Connect two wires (7) of vehicle wiring harness to top of fuel level sending unit (5) with two new lockwashers (3) and
nuts (2).
4.
Place battery disconnect switch in ON position. Turn ignition on and check that fuel gauge on instrument panel registers.
Turn off ignition switch.
END OF WORK PACKAGE
0021 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals