FUEL/WATER SEPARATOR ASSEMBLY REMOVAL

TM 9-2320-312-24-1

FUEL/WATER SEPARATOR MAINTENANCE - CONTINUED

0018 00

FUEL/WATER SEPARATOR ASSEMBLY REMOVAL

WARNING

When servicing this vehicle, performing maintenance, or disposing of materials such as engine coolant,

transmission fluid, lubricants, battery acids or batteries, consult your unit/local hazardous waste disposal

center or safety office for local regulatory guidance. If further information is needed, please contact The

Army Environmental Hotline at 1-800-872-3845.

NOTE

Use a drain pan to capture any draining fuel. Dispose of fuel in accordance with local policy and ordinances.

Ensure all spills are cleaned up.

Turn drain knob (6) clockwise and drain all fuel and water from sediment bowl into a drain pan.

CAUTION

Wipe area clean around all fuel connections prior to disconnecting. Cap or plug all openings after discon-

necting. Contamination of fuel system could result in equipment failure.

NOTE

Tag fuel hoses to ensure correct installation.

Disconnect two fuel hoses (7) from elbows (8).

CAUTION

Use caution not to damage floodlight.

Remove two nuts (2), screws (3), fuel/water separator assembly (1), and angle bracket (4) with floodlight from bracket

(5).

Remove two elbows (8) from fuel/water separator assembly (1).

0018 00-2