|
|
TM 9-2320-312-24-1
Table 1. Unit Preventive Maintenance Checks and Services (PMCS)
for the M878A2 Yard Tractor - Continued.
LOCATION
EQUIPMENT NOT
ITEM TO
ITEM
READY/AVAILABLE
CHECK/
NO.
INTERVAL
PROCEDURES
IF:
SERVICE
NOTE
3
Initial 100
Rear Axle
Hours
Hub Wheel
Rear axle assembly refill capacity is 41 pt (19.4 l).
Ends and
Differential
While axle is still warm, drain oil from hub
wheel ends and from differential (Group 090
Commercial Service Manuals). Refill with
gear lubricating oil (Item 38, 39 or 40, WP
4
Initial 100
Engine
a. Check oil, fuel, coolant, and air lines, a. Class III oil, fuel or coolant
hoses, and fittings for leaks and secure
Hours
Assembly
leaks are evident.
mounting.
b. Check oil filter base, oil pan, and oil pan b. Class III leaks are evident.
drain plug for leaks. Tighten or replace any
damaged component.
c. Check rocker arm cover for leaks. Tighten c. Class III leaks are evident.
or replace any damaged component.
d. Check engine accessories (e.g. AC com-
pressor, etc.) mounting hardware for loose-
ness. Tighten or replace any damaged
component, if authorized.
e. Check serpentine drive belt to ensure it is e. Serpentine belt is missing,
not missing. Check for looseness, tears,
broken, glazed or torn. Belt
glazed or frayed condition or cracks.
fiber has more than one crack
Replace if damaged (WP 0012 00).
1/8 in. (3.2 mm) in depth or
50% or more is frayed more
than 2 in. (5.1 mm) long.
f. Check electrical harnesses for burnt or f. Wiring is burnt, frayed, split or
frayed wires, corrosion, loose or broken
missing.
connections. If connections are loose,
tighten. If corrosion is present, clean.
a. Inspect transmission for loose transmission a. Class III leaks are evident.
5
Initial 100
Transmission
mount or bolts, or evidence of transmission
Transmission mounting bolts
Hours
and Transmi-
fluid leaks.
are loose or missing.
sion Oil
Cooler Hoses
0009 00-2
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |