|
| |
TM 9-2320-304-14&P
5-248
Direct Support and General Support Maintenance (Cont)
5-43. CONTAINER HANDLING UNIT (CHU) KIT INSTALLATION (CONT).
WARNING
Horizontal roller weighs 75 lbs. (34 kg).
Attach suitable lifting device prior to
installation to prevent possible injury to
personnel.
NOTE
·
Reuse roller, screw, locknut, and
thrust washer from removal of
horizontal roller.
·
Both rollers are installed the same
way. Right side shown.
(115) Attach lifting device to roller (155).
(116) With the aid of Soldier B, Soldier A
position roller (155) in right rear roller
bracket (67).
(117) Install two screws (156),
lockwashers (157), and lockplate (158)
in right rear roller bracket (67).
NOTE
Locknut is installed properly when locknut
is tightened and roller does not bind.
(118) Install thrust washer (159),
lockwasher (160), and locknut (161) on
roller (155).
(119) Bend tab of lockwasher (160) into slot
of locknut (161).
(120) Remove lifting device from roller (155).
(121) Repeat steps (115) through (120) for left
side of truck.
Change 1
|
