|
| |
TM 9-2320-304-14&P
2-45
Operating Instructions (Cont)
(8) Release joystick (10).
(9) Inspect and verify trailer guides (12) are lined up between flatrack main rails (13).
NOTE
If not alined, do step (10). If alined, go to step (11).
(10) If not alined:
(a) Move joystick (10) to LOAD position.
(b) When flatrack is fully reloaded, release joystick (10).
(c) Repeat steps (6) through (8).
(11) Move joystick (10) to UNLOAD position until hook arm cylinders (14) have fully extended and
main frame cylinders (15) have extended 6 to 12 in. (35 to 30 cm).
(12) Release joystick (10).
CAUTION
Engine speed must be at idle before using hydraulic selector switch or damage to equipment
may result.
(13) Turn hydraulic selector switch (9) to MAN H.A. position.
(14) Move joystick (10) to LOAD until flatrack rear rollers (11) are centered between trailer stacking
brackets (16).
(15) Release joystick (10).
(16) Turn hydraulic selector switch (9) to MAN M.F. position.
|
