|
| |
TM 9-2320-304-14&P
5-202
Direct Support and General Support Maintenance (Cont)
5-38. LOAD HANDLING SYSTEM (LHS) HOOK ARM/MAIN FRAME CYLINDER
REPAIR (CONT).
(3) Install lube fitting (8) to cylinder (9).
(4) Apply hydraulic oil to piston seal
assembly (10) and two wear rings (11).
(5) Install piston seal assembly (10) and two
wear rings (11) on piston (12).
(6) Apply hydraulic oil to inside diameter of
rod bearing (7).
(7) Install rod bearing (7) on rod (13).
(8) Install rod lug (14) on rod (13).
(9) Position nylon plug (15) and screw (16)
in rod lug (14).
(10) Tighten to 41 lb-ft. (56 NSm).
(11) Install lube fitting (17) to rod lug (14).
|
