|
| |
TM 9-2320-304-14&P
5-199
Direct Support and General Support Maintenance (Cont)
WARNING
Cylinder weighs in excess of 210 lbs.
(95 kg). Attach suitable lifting device prior
to removal to prevent possible injury to
personnel.
(7) Using lifting device, remove cylinder (1)
from chain vise.
(8) Remove lifting device from cylinder (1).
(9) Remove screw (6), rod lug (7), and rod
bearing (4) from rod (2).
(10) Remove nylon plug (8) from bottom of
screw hole in rod lug (7). Discard nylon
plug.
(11) Remove lube fitting (9) from rod lug (7).
NOTE
In steps (12) and (13) note location and
position of rings, seals, and packings prior
to removal.
(12) Remove two wear rings (10) and piston
seal assembly (11) from piston (5).
Discard wear rings and seal assembly.
|
