|
| |
TM 9-2320-304-14&P
5-177
Direct Support and General Support Maintenance (Cont)
(4) Install solenoid valve coil (6) on solenoid
valve (4) with nut (7).
(5) Install connector (8) on solenoid valve
coil (6) with screw (9).
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in well-
ventilated area. If adhesive, solvent, or
sealing compound gets on skin or clothing,
wash immediately with soap and water.
(6) Apply sealing compound to the head of
screw (13).
(7) Install LHS main junction box cover (10)
on bracket (11) with four lockwashers
(12) and screws (13).
(8) Connect two hose quick disconnects (14)
on main junction box quick
disconnects (15).
c. Follow-on Maintenance.
(1) Start engine (TM 9-2320-279-10).
(2) Operate LHS (Para 2-9).
(3) Check for oil leaks (TM 9-2320-279-10).
(4) Shut OFF engine (TM 9-2320-279-10).
(5) Check hydraulic oil reservoir level
(TM 9-2320-279-20).
(6) Remove wheel chocks
(TM 9-2320-279-10).
END OF TASK
|
