|
| |
TM 9-2320-304-14&P
5-173
Direct Support and General Support Maintenance (Cont)
(5) Install two screws (9) and locknuts (10) on
bracket (8).
(6) Remove two screws (11) and
locknuts (12) from bracket (8). Discard
locknuts.
(7) Install two screws (11) and locknuts (12)
on bracket (8).
(8) Install LHS control box cover (13) on
bracket (8) with four lockwashers (14)
and screws (15).
(9)
Connect two hose quick
disconnects (16) on control box quick
disconnects (17).
c. Follow-on Maintenance.
(1) Start engine (TM 9-2320-279-10).
(2) Operate LHS (Para 2-9).
(3) Check for leaks (TM 9-2320-279-10).
(4) Shut OFF engine (TM 9-2320-279-10).
(5) Check hydraulic oil reservoir level (TM 9-2320-279-20).
(6) Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
|
