|
| |
TM 9-2320-304-14&P
5-171
Direct Support and General Support Maintenance (Cont)
(5) Push on top of bracket (6) towards front
of truck enough to lift rear of bracket (6)
approximately 2 in. (5.08 cm), and place
two wooden blocks under bracket (6).
(6) Position drain pan under relief
valve (12).
(7) Remove relief valve (12) from
manifold (13).
(8) Remove two backup rings (14),
preformed packing (15), two backup
rings (16), preformed packing (17), and
preformed packing (18) from relief
valve (12). Discard backup rings and
preformed packings.
|
