|
| |
TM 9-2320-304-14&P
5-168
Direct Support and General Support Maintenance (Cont)
5-32. LOAD HANDLING SYSTEM (LHS) TRANSIT VALVE REPLACEMENT (CONT).
b. Installation
(1) Apply hydraulic oil to four preformed packings (1).
(2) Install four preformed packings (1) on transit valve (2).
(3) Install transit valve (2) on hydraulic manifold (3) with four screws (4).
(4) Install connector (5) on transit valve (2) and tighten screw (6).
WARNING
Adhesives, solvents, and sealing compound can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and
use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
(5) Apply sealing compound to head of screw (6).
(6) Install LHS control box cover (7) on
bracket (8) with four lockwashers (9)
and screws (10).
(7) Connect two hose quick disconnects (11)
on main junction box quick
disconnects (12).
c. Follow-on Maintenance.
(1) Start engine (TM 9-2320-279-10).
(2) Operate LHS (Para 2-9).
(3) Check for oil leaks (TM 9-2320-279-10).
(4) Shut OFF engine (TM 9-2320-279-10).
(5) Check hydraulic oil reservoir level
(TM 9-2320-279-10).
(6) Remove wheel chocks
(TM 9-2320-279-10).
END OF TASK
|
