|
| |
TM 9-2320-304-14&P
5-153
Direct Support and General Support Maintenance (Cont)
(17) Remove couplings (42 and 43) and two
preformed packings (44) from
fittings (45). Discard preformed
packings.
(18) Remove two nuts (46), elbow (38), and
elbow (41) from bracket (47).
(19) Loosen four screws (48) and remove
cover (49) from LHS junction box (7).
(20) Remove four locknuts (50), screws (51),
and LHS junction box (7) from LHS
manifold assembly (4). Discard
locknuts.
(21) Remove eight screws (52),
lockwashers (53), and bracket (4) from
hydraulic manifold (54). Discard
lockwashers.
(22) Heat screw (55) where installed to LHS
manifold bracket assembly (4) with
propane torch.
WARNING
Screws are extremely hot. Do not touch
screws without protective gloves or severe
burns to hands could result.
(23) Remove two screws (55),
lockwashers (56), washers (57), and
spacers (58) from bracket (4). Discard
lockwashers.
|
