|
| |
TM 9-2320-304-14&P
5-132
Direct Support and General Support Maintenance (Cont)
5-26. COMPRESSION FRAME REPAIR (CONT).
c. Assembly.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in a
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(1) Coat threads of three rubber
bumpers (1) with sealing compound.
(2) Install three rubber bumpers (1) in
compression frame (2).
(3) Install locknut (3) on rubber bumper (1).
(4) Install bulkhead union (4) with nut (5)
in compression frame (2).
CAUTION
Ensure correct preformed packing is
installed on fitting or damage to packing
will result.
(5) Apply hydraulic oil to preformed
packing (6).
(6) Install nut (7), compression ring (8),
spacer (9), and preformed packing (6) on
left side compression frame tube (10).
(7) Install left side compression frame
tube (10) in bulkhead union (4) and slide
preformed packing (6) with spacer (9)
and compression ring (8) into bulkhead
union (4).
(8) Install nut (7) on bulkhead union (4).
|
