|
| |
TM 9-2320-304-14&P
2-34
Operating Instructions (Cont)
2-9. LOAD HANDLING SYSTEM (LHS) (CONT).
CAUTION
·
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
·
Main frame cylinders must be completely retracted prior to completely loading the
hook arm.
(23) Turn hydraulic selector switch (6) to MAN H.A. position.
CAUTION
Failure to reduce engine speed to idle could result in severe damage to LHS components.
(24) Move joystick (7) to LOAD position and increase engine speed until flatrack is nearly loaded,
then reduce speed to idle.
(25) Continue to load until LHS and flatrack/FRS are in transit position. LHS NO TRANSIT
indicator (12) will go off.
(26) Release joystick (7).
(27) Pull out PARKING BRAKE control (13).
(28) Make sure that load locks (14) have engaged and flatrack/FRS is fully down on truck.
Change 1
|
