|
| |
TM 9-2320-304-14&P
4-234.68
Organizational Maintenance Instructions (Cont)
4-53.13 CONTAINER HANDLING UNIT (CHU) BUMPER REPLACEMENT (CONT).
b. Installation.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
NOTE
Left and right bumpers are identical.
Right bumper is shown.
(1)
Apply sealing compound to two
screws (1) and locknuts (2).
(2)
Install bumper (3) on bumper
weldment (4) with screws (1),
washers (5), and locknuts (2).
d. Follow-on Maintenance. Remove wheel chocks (TM 9-2320-364-10).
END OF TASK
Change 1
|
