|
| |
TM 9-2320-304-14&P
4-234.59
Organizational Maintenance Instructions (Cont)
b. Installation.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(1)
Apply sealing compound to threads of
screw (1).
(2)
Install screw (1) and axle stop (2) on
rear guide (3).
WARNING
Rear guide assembly weighs 70 lbs. (32 kg).
Attach suitable lifting device to prevent
possible injury to personnel.
(3)
Attach lifting device to rear guide (3).
(4)
Soldier A and Soldier B position rear
guide (3) on frame (4) with two
lockwashers (5) and screws (6).
(5)
Install screw (7), washer (8), and
locknut (9) on rear guide (3).
(6)
Soldier A and Soldier B position four
locknuts (10) and screws (11) on rear
guide (3).
(7)
Soldier A and Soldier B tighten two
screws (6) on rear guide (3).
(8)
Soldier A and Soldier B tighten four
locknuts (10) on rear guide (3).
(9)
Remove lifting device from rear
guide (3).
c. Follow-on Maintenance. Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
Change 1
|
