|
| |
TM 9-2320-304-14&P
4-234.56
Organizational Maintenance Instructions (Cont)
4-53.9 CONTAINER HANDLING UNIT (CHU) FRONT LIFT ADAPTER LOCKING PLATE
ASSEMBLY REPLACEMENT (CONT).
a. Removal.
NOTE
There are two locking plate assemblies. Both are installed the same way. Left side is shown.
(1)
Remove quick release pin (1) from front lift adapter (2).
(2)
Remove two cotter pins (3), hinge pin (4), and locking plate (5) from front lift adapter (2).
Discard cotter pins.
NOTE
Perform step (3) if wire rope or pins are damaged.
(3)
Remove two swaging sleeves (6), wire rope (7), and quick release pin (1) from locking plate (5).
b. Installation.
NOTE
·
There are two locking plate assemblies. Both are installed the same way. Left side is
shown.
·
Perform step (1) if wire rope or pins were removed.
(1)
Install wire rope (7) to quick release pin (1) and locking plate (5) with two swaging sleeves (6).
(2)
Install locking plate (5) on front lift adapter (2) with hinge pin (4) and two cotter pins (3).
(3)
Install quick release pin (1) on front lift adapter (2).
c. Follow-on Maintenance.
(1)
Lubricate locking plate (TM 9-2320-279-10).
(2)
Install front lift adapter on truck (Para 2-10.11).
(3)
Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
Change 1
|
